Reinforcement QST Training

​​​BHADANI’S PLUMBING DESIGN AND DETAILING COURSE FOR ALL ENGINEERS

Plumbing Designing  Duration 45 Days (30 Days + 15 Days Project)

1. Plumbing Systems
a. Fundamentals of Plumbing System
b. Introduction, Definitions & Concepts
c. List of codes & Standards
d. Fixtures, Faucets and Fixture fittings
i. Washbasin
ii. Water Closet
iii. Bidet 
iv. Bathtub 
v. Shower 
vi. Urinals
vii. Kitchen sink
viii. Floor Drain


2. Design of Domestic Water Supply and Distribution System
a. Requirements of Water Supply system
b. Water Demand Calculations Water
c. StorageCalculationsUndergroundSump(UGS)sizing
ElevatedstorageReservoir(ESR)sizingInternalWater
Supply System
d. Direct Pumping System
e. Hydro-pneumatic system
f. Over Head tank distribution system
g. Design Procedure for Internal Water Supply System
h. Flow rate (q) & Loading Unit (z)-From probability equation
i. Hazen Williams Formula for Head loss Calculation 
InternalWater Supply Pipe sizing calculations
Pumping Calculations- HP/Watts
j. Number of tapping to be connected Heavier Size Pipes.
k. Material used in internal water supply system
l. . External. Water Supply System
m. Number of Population served
n. Number of Fixtures served by Each Pipe
o. Design Procedure for External Water supply System External 
Water Supply Pipe Sizing Calculations Material used
in External water supply system 
p. Water Supply Schematic Layout


3. Design of Sanitary Drainage System
a. Requirements of Sanitary Drainage System
b. Types of Sanitary Drainage Systems
c. Single stack system
d. Single stack (partially ventilated ) system
e. One Pipe System
f. Two Pipe System
g. System requirement for Internal Sanitary Drainage System
h. Internal Sanitary Drainage Pipe Sizing Calculations
i. Design Procedure for External Sanitary Drainage System
j. External Sanitary Drainage Pipe Sizing Calculations
k. Calculation of Slope by Manning’s formula
l. Calculating Depth of Inspection Chamber/Manholes
m. Sanitary Drainage Schematic Layout 
n. Design of Storm Water Drainage System
o. Design of Basement Drainage System
p. Using Manning’s Formula and Rational formula
q. Storm Water Drainage Pipe Sizing Calculations
r. Material used in Sanitary Drainage system


4. Drawings – Plumbing Layouts
a. Legends used in Plumbing 
b. Legends used in Plumbing 
c. Typical Floor Plan-Plumbing Layout
d. Enlarged Kitchen & Utility-Plumbing Layout
e. Riser Diagram for multi storied buildings.


5. The Other aspects
a. Life Cycle of the Project
b. Different stages in Design and Drafting
c. Communication between the different teams,
d. Mode of communication using standard formats
and templates
e. Project Management Tools
f. Maintaining Safe and healthy working environment


6. Employability Skills Improving
a. Resume Writing Skills Improving 
b. Interview Skills En powering
c. En Powering of Interpersonal Relationships.
d. Stress Management.
e. Positive Attitude Development.
f. Self-Motivation.




Get Certified in Management in Quality, Six Sigma, Construction, Real Estate , Safety, Waste, Strategic Management and more..

QUANTITY SURVEYOR COURSE IN KOLKATA

NOT PERFOMING WELL IN JOB, TRY BHADANI'S UNIQUE FORMULA!! WE TRAIN CANDIDATES AS PER THE CONSTRUCTION COMPANY REQUIREMENTS OF INDIA AND ABROAD SO THAT OUR CANDIDATES CAN PERFORM BETTER IN THEIR JOB WORKS--CALL 9990990844 FOR NEW BATCHES FOR QUANTITY SURVEY AND ESTIMATION LEVEL 1 AND BILLING ENGINEER COURSE LEVEL 2 IN GHAZIABAD (U.P) DELHI KOLKATA(DUM DUM)AND PUNE(MAHARASHTRA) BANGALORE JAIPUR AND CHENNAI BRANCH-- COME AND REGISTER YOURSELF AND BECOME A PROFESSIONAL CIVIL ENGINEER BEST SHORT TERM COURSES FOR CIVIL ENGINEERS IN INDIA DELHI BEST COURSE AFTER B.TECH OR DIPLOMA IN CIVIL ENGINEERING AT GHAZIABAD DELHI KOLKATA BRANCHES -WEEKEND BATCHES ARE ALSO AVAILABLEAT ALL BRANCHES BHADANI QUANTITY SURVEYOR INSTITUTE IN DELHI | GHAZIABAD | PUNE| BANGALORE | KOLKATA | BHUBANESHWAR | ODISHA | QUANTITY SURVEYOR COURSE| QUANTITY SURVEYING INSTITUTE LEVEL 1 | DELHI PUNE BANGALORE KOLKATA CHENNAI ESTIMATION TRAINING INSTITUTE (Certification Course in Quantity Survey Estimation BEST Short Term Courses After Btech Civil Engineering), Estimating Course Delhi, Cost consultants Course Delhi, Project Management Course for Civil Engineers

BHADANI’S Quantity Surveying in  Construction Project Planning & Management (CPM)
Level 5 Duration :- 25 Days

  1. Critical Thinking and Problem Solving Approach 

  2. Strategical Thinking and Risk Analysis 
  3. Project Planning - Master Plan Generation 
  4. Project Management Procedures Used for Construction Industry by Big MNC's and Construction Companies of India and World
  5. Role of Project Manager in Construction Industry
  6. Project Budget Preparation with all factors analysis in Hand
  7. Actual Situation Comparison with Budget Amount
  8. Progress Monitoring with the Key Indicators Strategy
  9. MS Project Basics - Scheduling 
  10. Project Coordination Techniques with Accounts , HR , Purchase and Procurement Departments with easy solutions 
  11. Management Information Generation
  12. Modern Building Construction Trends Execution Plan & Strategy Building
  13. Resettlement and Rehabilitation (R&R) for speedy progress of work
  14. Quality Assurance with Total Quality Control Planning 
  15. Site (Field) Management Techniques used by Project Managers at Site
  16. Management of Emergencies in High Rise Buildings
  17. Self Inspection for Quality Construction at Site
  18. Cost and Time Controlling Strategies used for Construction Projects
  19. Cash Flow Monitoring - Budget Vs Actual Comparison
  20. Green Sheet Report - Profit and Loss Determination for Construction Projects
  21. SWOT Analysis for Construction Project
  22. JIT Implementation in any Construction Project
  23. ​Earned Value Management (EVM) in Construction Project


bhadani payment online
Real Estate Management Training Institute BHADANIS

​​​​

HVAC DESIGN AND DRAFTING COURSE  FOR ALL

1.Prelude to HVAC

 a. Fundamentals
 b. Modes of Heat Transfer
 c. Sensible Heat and Latent Heat
 d. Codes and Standards

2.Basic Components of Air-Conditioning and Refrigeration machines

 a. Basic Refrigeration System or Vapor Compression Cycle
 b. Pressure – Enthalpy Chart
 c. Function & Types of Compressor
 d. Function & Types of Condenser
 e. Function & Types of Expansion Valve
 f. Function & Types of Evaporator
 g. Accessories used in the System
 h. Refrigerant and Brines

3. Classification of Air-Conditioning System 
  a. Window A/C
     i.Working of Window A/C with Line Diagrams
  b. Split A/C
     i.Types of Split A/C
     ii.Working of Split A/C with Line Diagrams
  c. Ductable Split A/C
     i.Working of Ductable Split A/C with Line Diagrams
 d. Variable Refrigerant Volume (VRV)/Variable Refrigerant Flow (VRF)
 e. Ductable Package A/C
     i.Working of Ductable Package A/C with Line Diagrams
     ii.Package Roof Top Units
 f. Central Plant Chill Water System

4. Categories of Air Conditioning 
 a. All air system 
 b. All water system 
 c. Air - water system
 d. Direct Refrigerant system
5. Study of Psychometric Charts
 a. Dry Bulb Temperature
 b. Wet Bulb Temperature
 c. Dew Point Temperature
 d. Relative Humidity
 e. Humidity Ratio
 f. Processes
  i.Heating
  ii.Cooling
  iii.Cooling and Dehumidification
  iv.Heating and Humidification
  v.Finding Values Using the Chart

6. Load Calculation.
 a. Survey of Building
 b. Cooling Load Steps
 c. Finding Temperature difference(?T) (Wall, Glass, Roof , Partition)
 d. Finding ‘U’ Factor (Wall, Glass, Roof, Partition)
 e. Finding Ventilation requirement for IAQ
 f. Load Calculations (Manually using E-20 form)
 g. ESHF, ADP & Air Flow Rate(CFM) Calculation

7. Air Distribution System
 a. Duct-Definition & Terminology 
 b. Duct Design consideration
 c. Duct sizing methods 
 d. Duct sizing as per Aspect Ratio
 e. Finding Duct size using Ductlator
 f. Selection of Diffusers and Grilles
 g. Gauge selection for Sheet Metal
 h. BOQ Preparation for Duct System.
 i. Legends and Symbols used in the HVAC Industry
 j. Duct Materials and Insulation materials used in HVAC Industry
 k. Concept of CAV & VAV


8. Static Pressure Calculation
 a. Selection of Motor HP
 b. Selection Fan/Blower RPM
 c. Selection Air Handling Units.

9. Hydronic System
 a. Classification of Water Piping 
 b. Pipe sizing for chill water system
 c. Fittings used in the HVAC Piping System
 d. Valves used in the HVAC Piping System
 e. Function of Valves
 f. Pump Head Calculation
 g. Selection of Pumps

10. VRF/VRV System
 a. Selection of VRF/VRV Equipments
 b. Indoor unit grouping
 c. Copper Pipe Sizing
 d. Refnet Pipe Selection

11. Air Conditioning Concepts
 a. District Cooling System
 b. Green Building
 c. Clean Rooms

12. Ventilation systems
 a. Kitchen ventilation system
 b. Car parking ventilation system
 c. Toilet Exhaust Ventilation System

13. Fire Protection (Awareness) 


14. HVAC software’s 
 a. XL sheet for Load Calculation
 b. Carrier Block Load for Load Calculation (HAP)
 c. Duct sizer for Duct sizing
 d. TroxCADBase for Diffuser & Grilles
 e. Pipe sizer for Pipe sizing
 f. Psychrometric Software

15. Improving Employability Skills 
 a. Resume Writing Skills
 b. Interview Skills Empowering
 c. Empowering of Interpersonal Relationships
 d. Stress Management
 e. Positive Attitude Development
 f. Self-Motivation
 g. Sentence formation
 h. Presentation skills
 i. Roles & Responsibilities of Design Engineers
Project Work:
• Two projects have to be completed before getting the Certificate and Placement Assistance.

HVAC Course Duration : 45 days

Eligibility
Any Graduation, Diploma


BHADANI’S Quantity Surveying in - Billing Engineering

Invoice Engineering
Level 2 Duration :- 25 Days

  1. Understanding the Role of BHADANI'S Billing Engineer / Invoice Engineering in the Construction Industry of India and World

  2. Billing Engineering Tasks at Site Office and Understanding the Role in Head office with the Client Coordiation
  3. Account Basics requirement for Billing Engineer
  4. Construction Billing Procedures From Client Side as well as Contractor Side
  5. Interim Payment Certification (IPC) from Client Sides as well as Contractor Side
  6. RA Bill Making - Client Billing - Subcontracting
  7. Billing with GST and Without GST - hands of Expertise
  8. CPWD and Corporations and PSU's Techniques of Billing 
  9. Invoice Generation Through ERP 
  10. Claim and Dispute Settlement Procedures and all required techniques in Billing and MIS Generation for the same
  11. Material Engineering Bills for Both Client Side as well as Contractor's Side
  12. Third Party Contractor Billing
  13. Joint Venture Companies / Contractor Billing
  14. Petty/ Vendor Billing 
  15. Preliminary Billing - Post Construction Billing
  16. InterAlia Billing , International Billing Challan Generation
  17. Claim Management Procedures used by Invoice Engineers
  18. Claim of Price Variations as per Norms of Govt. of INDIA
  19. Claim of Quantity Variations as per the Norms of Govt. of INDIA
  20. Mode of Measurement as per IS Codes with Nomenclatures
  21. Claim of Extra Item Analysis of All Kinds of Civil Works During the Site Execution as well as Post Contracting Period
  22. Vendor Vs. Client Bill Reconciliation

Metro Stations
Mundka, Rajdhani Park, Nangloi Railway Station, Nangloi, Nangloi, Surajmal Stadium, Udyog Nagar, Peeragarhi, Sachdev Park, Paschim Vihar, Madi Pur, Shivaji Park, Punjabi Bagh, Ashok Park Main, Satguru Ram Singh Marg, Moti Nagar
Mundka, Rajdhani Park, Nangloi Railway Station, Nangloi, Nangloi, Surajmal Stadium, Udyog Nagar, Peeragarhi, Sachdev Park, Paschim Vihar, Madi Pur, Shivaji Park, Punjabi Bagh, Ashok Park Main, Inderlok
Rithala, Rohini West, Rohini East, Pitampura, Kohat Enclave, Netaji Subhash Place, Keshav Puram, Kanhya Nagar, Inderlok, Shastri Nagar, Pratap Nagar, Pulbangash, Tis Hazari, Kashmiri Gate, Shastri Park, Seelam Pur, Welcome, Shahadra, Mansarovar Park, Jhilmil, Dilshad Garden 
Jhangirpuri, Adarsh Nagar, Azadpur, Model Town, G.T.B Nagar, Vishwa Vidyalaya, Vidhan Sabha, Civil Lines, Kashmiri Gate, Chandni Chowk, Chawri Bazar, New Delhi, Rajiv Chowk, Patel Chowk, Central Secretariat 
Dwarka Sec-9, Dwarka Sec-10, Dwarka Sec-11, Dwarka Sec-12, Dwarka Sec-13, Dwarka Sec-14, Dwarka, Dwarka Mor, Nawada, Uttam Nagar West, Uttam Nagar East, Jank Puri West, Jank Puri East, Tilak Nagar, Subhash Nagar, Tagore Garden, Rajouri Garden, Ramesh Nagar, Kirti Nagar, Moti Nagar, Shadipur, Patel Nagar, Rajendra Place, Karol Bagh, Jhandewalan, R K Ashram, Rajiv Chowk, Barkhaba Road, Mandi House, Pragati Madan, Inderprastha, Yamuna Bank, Laxmi Nagar, Nirman Vihar, Preet Vihar, Karkar Duma, Anand Vihar ISBT
Dwarka Sec-9, Dwarka Sec-10, Dwarka Sec-11, Dwarka Sec-12, Dwarka Sec-13, Dwarka Sec-14, Dwarka, Dwarka Mor, Nawada, Uttam Nagar West, Uttam Nagar East, Jank Puri West, Jank Puri East, Tilak Nagar, Subhash Nagar, Tagore Garden, Rajouri Garden, Ramesh Nagar, Kirti Nagar, Moti Nagar, Shadipur, Patel Nagar, Rajendra Place, Karol Bagh, Jhandewalan, R K Ashram, Rajiv Chowk, Barkhaba Road, Mandi House, Pragati Madan, Inderprastha, Yamuna Bank, Laxmi Nagar, Nirman Vihar, Preet Vihar, Karkar Duma, Anand Vihar ISBT, Kaushambi, KB Vashali 
Dwarka Sec-9, Dwarka Sec-10, Dwarka Sec-11, Dwarka Sec-12, Dwarka Sec-13, Dwarka Sec-14, Dwarka, Dwarka Mor, Nawada, Uttam Nagar West, Uttam Nagar East, Jank Puri West, Jank Puri East, Tilak Nagar, Subhash Nagar, Tagore Garden, Rajouri Garden, Ramesh Nagar, Kirti Nagar, Moti Nagar, Shadipur, Patel Nagar, Rajendra Place, Karol Bagh, Jhandewalan, R K Ashram, Rajiv Chowk, Barkhaba Road, Mandi House, Pragati Madan, Inderprastha, Yamuna Bank, Mayur Vihar -1, Mayur Vihar -1 Extn., New Ashok Nagar, Noida Sec -15, Noida Sec -16, Noida Sec -18, Botanical Garden, Golf Course, Noida City Centre 
 
Central Secretariat, Udyog Bhwan, Race Cours, Jor Bagh, A.I.I.MS, Green Park, Hauz Khas, Malviya Nagar, Saket, Qutab Minar, Chatarpur, Sultan Pur, Ghitorni, Arjan Garh, Guru Dronacharya, Sikandarpur, MG Road, IFFCO Chowk, Huda City Centre 
Central Secretariat, Khan Market, JLN Stadium, Jangpura, Lajpat Nagar, Mool Chand, Kailash Colony, Nehru Place, Kalkaji, Govind Puri, Okhla, Jasola, Sarita Vihar, Mohan Estate, Tughlakabad, Badar Pur Border 

AN OLDEST AND TRUSTED BRAND IN QUANTITY SURVEYING IN INDIA FOR  CIVIL  MECHANICAL  ELECTRICAL ENGINEERS AND CONSTRUCTION PROFESSIONALS

Want to Schedule an Appointment Fill Below Form

Want to Schedule an Appointment Fill Below Form

Get Certified in Management in Quality Construction Real Estate Strategic Management adn more..

Certificate Course in Real Estate Management

NAREDCO, HUDCO-HSMI and GGSIPU jointly offer a Certificate Course in Real Estate Management focusing on Real Estate Sales;(Recognized by Guru Gobind Singh Indraprastha University, Delhi)
Target Group

Aspiring and Existing Real Estate Agents; Sales and Marketing Managers & Executives, Managers & Executives in Project Planning & Management, Managers and Executives in Corporate Communication; anybody interested in taking up real estate profession.
Certificate Background

The certificate course is a collaborative initiative of Guru Gobind Singh Indraprastha University (GGSIPU), National Real Estate Development Council (NAREDCO) and Human Settlement Management Institute (HSMI) of Housing and Urban Development Corporation (HUDCO) for real estate agents, property brokers, sales persons, commercial and customer care executives and sales and home loan agents working any where in India.


Transactions in the real estate market are primarily linked through sales persons and brokers. Brokerage activities relate to selling, leasing, renting, managing, lending, soliciting and negotiating in return for compensation. Property transactions over the years have become very specialized and complex. Therefore, it is necessary for brokers and sales persons to acquire specialized knowledge of property laws and market operations. Further, brokerage practices in India need to be regulated through a code of conduct developed by NAREDCO.

 

Venue : Human Settlement Management Institute (HSMI), Research and Training Division of HUDCO, HUDCO House, Lodhi Road, New Delhi – 110003
Date : 3rd May 2016 to 20th May 2016
Course Duration & Timing : 2.00 P.M. to 5.30 P.M,
Three weeks (4 days a week - Tuesday, Wednesday, Thursday and Friday)
Last date for Nomination : 29th April 2016 ((Registration is on first cum first served basis)
Programme Capacity : Limited Seats subject to maximum of 40 persons
Course Fees : The course fee per participant is Rs. 20,000/- (Rupees Twenty Thousand Only). A bank draft of Rs. 20,000/- (Rupees Twenty Thousand Only) drawn in favour of “National Real Estate Development Council”, New Delhi along with the nomination form will be sent to NAREDCO to reach before the closing date of registration.
Contact Numbers : +91-11-26225795 (Ext. 22), +91-11-41608570
Course ObjectiveTo impart specialized knowledge and skills to real estate agents, sales persons and direct sale and home loan agents in real estate principles, property laws, financial appraisal, brokerage and professional conduct.

The participants would acquire the requisite functional skills and practically apply the concepts internalized from the course. They will be benefited by a sound understanding of the real estate sector as also equipped to advise the clients confidently, thereby meeting their expectations. The certificate would give them greater acceptability in the market which is dominated by fly-by-night operators and unscrupulous practitioners operating in a climate of distrust. Under the circumstances, the customers would prefer to deal with NAREDCO certified sales agents as against those who are not. This shall lead to an improved climate for ethical dealings which will give a fillip to the real estate sector.
Methodology

This programme is structured as a professional interaction between the faculty and the participants in a problem-solving manner. The experience of participants is perceived as an essential professional input into the programme. With this in view, the participants are expected to bring with them the necessary reference material and documented field experiences. The key component of methodology shall include lectures, group work, exercises, interaction with resource persons, audio-visual based presentations, and discussions.
Course Content

The course content shall include the key components of the subject area namely:

Brokerage – Concepts & various issues namely ethics and professional code of conduct. Responsibilities of a broker-buying/selling/leasing/renting process. Effective management of the transactions. Real estate contracts (Provisions)-lease agreement, agreement to sell, transactions relating to NRIs, title search of the property. Documentation required in transactions of sale/purchase/lease. Registration of documents. Basic understanding of the revenue records maintained by Municipal Corporation. Closing transactions; negotiation skills.

Real Estate Financing – namely real estate financing process, procuring and closing a loan, mortgages, foreclosure laws (NHB Act etc), lending practices, procedures and documentation as required by financial institutions and banks.

Real Estate Appraisal – Theoretical concepts, principles and criteria for valuation of property, market behavioral trends in real estate.

Planning, Zoning and Development – General understanding in planning, zoning, sub-division of land. Relevant provisions and rules for sub-division. Planning standards and norms as applicable to the Housing and Construction industry. Basic understanding of standard construction practices inclusive of efficient planning, suitable building materials and sound construction. Management of Buildings and Complexes. Knowledge of building materials/technologies.

Legal Framework including various acts and procedures – namely Apartment Ownership Act, Indian Registration Act, 1908, Stamp Act, Co-operative Societies Act, Rent Control Act, Wealth Tax Act, Building bye-laws, The Punjab Schedule Roads and Controlled Areas Restriction of Unregulated Development Act, Consumer Protection Act, 1986, Law of Contract, Municipal Laws, Law of Agency, Relevant sections related properties-income tax act & FEMA, RBI guidelines for property investment.

Escrows – Introduction to the escrow concept.

Urban Infrastructure – Development approaches such as public-private partnerships, social infrastructure-responsibilities and accountability.

Business Management – including marketing techniques, dynamics of customer satisfaction, communication skills, personality development, after sale service etc.

Vaastu Shastra – Approach in design of buildings.

Seismic effects and protection in building construction.
Medium of Instruction

The programme shall be conducted in ENGLISH.
Who can do the course?

The certificate course is open for Real Estate Agents, Sales Persons, Commercial and Customer Care Executives associated with Developers and Builders and Direct Sales Agents and Home Loan Agents associated with Housing Finance Institutions and Banks, working any where in India, and for persons who are keen to adopt this profession. The minimum qualification for eligibility is 10+2 or equivalent and the person should be 18 years of age. The programme is open to both men and women.
Course Fees

The course fee per participant is Rs. 20,000/- (Rupees Twenty Thousand Only). A bank draft of Rs. 20,000/- (Rupees Twenty Thousand Only) drawn in favour of “National Real Estate Development Council” , New Delhi along with the nomination form will be sent to NAREDCO to reach before the closing date of registration.
Programme Faculty

The faculty shall include both in-house faculty of NAREDCO, HSMI and GGSIPU and resource persons and experts in the related areas.

​​BHADANI’S

Real Estate Business Creation and Management Course
Eligibility:-

For Business Owners, Real Estate Professionals , 12th Pass, Architects, Engineers or any Construction Professional or Want to make professional career in Real Estate & Construction Industry are eligible and welcome for this effective training

  1. Understanding the Importance of Real Estate in today's world economy

  2. Drawing Reading (Structural and Architectural)

  3. Estimation Costing and Valuation of Land and Building and other Real Estates portions

  4. Real Estate Private Public Contracts 

  5. Real Estate Contracts and its Administration and Management

  6. Persuation , Pre -suation and Negotiation Strategies

  7. Sales and Marketing in Real Estate 

  8. Communication Skills Techniques used in Real Estate Industry

  9. ​Real Estate Laws and Regulations in India and Gulf

  10. Different Types of Investment Strategies used in Real Estate 
  11. Introduction to Entrepreneurship and Leadership
  12. NLP Techniques used in Real Estate 
  13. Property Management with FM
  14. Real Estate Techniques like Cash flow, Growth , Hybrid and much more...
  15. Real Estate Agents and Property Dealers
  16. Real Time Situation and Market Research
  17. Housing Policy Discussions
  18. New Topics Every Week....


CAREER OPPORTUNITIES :- You may start your own Real Estate Company, Become an Investor or Advisor or Work in any Real Estate Firm as a Consultant , Advisor for the Client, Become Real Estate Manager and Earn maximum in this Real Estate Industry


Other Benefits :- Will Join in our What's app group of Real Estate Professionals, Meet with different delegates who come and take training and make a group to create a Real estate company , Meet Investors who are willing to Invest in your project and many more..


Duration :- 3 Months 

Fees :-  INR 60,000 (ONE TIME PAYMENT) , 2 INSTALLMENT INR 33000 EACH MONTH


TIMINGS :- ON WEEKDAYS :- MON , WED , FRI  | ON WEEKENDS:- SAT AND SUN






Enter Message Mobile Number in the box

Enter Message Mobile Number in the box

-BEST COURSE FOR CIVIL ENGINEERS MECHANICAL HVAC PLUMBING DESIGN COURSES AND ELECTRICAL ENGINEERS AND CONSTRUCTION PROFESSIONALS IN INDIA AS BHADANI'S LEADING AND TRUSTED TRAINING PROVIDERS IN DELHI PUNE BANGALORE KOLKATA ODISHA JAIPUR GHAZIABAD MAHARASHTRA FOR QUANTITY SURVEYING TENDERING CONSTRUCTION CONTRACTS CLAIM MANAGEMENT AND PROJECT MANAGEMENT BRANCHES IN PUNE DELHI GHAZIABAD JAIPUR BANGALORE PUNE CHENNAI KOLKATA ODISHA

QUALITY CONTROL QUALITY ASSURANCE FOR ALL ENGINEERS

Module1

Roles and Responsibilities of QA / QC Engineer – Civil
Module 2

Introduction to ISO 9001 . ISO 9004 , ISO 14000. ISO 19011
Module 3

International Codes and Standards
Module 4

Drawings and Abbreviations
Module 5

Excavation and Backfilling
Module 6

Construction of Asphalt Concrete paving
Module 7

Concreting Works
Module 8

Pre Stressed Concrete – Bridge Girders
Module 9

Concrete Trial Mix Test, Concrete Compressive Strength Test , Compaction (Density) Test etc.
Module 10

Receiving Inspection , In process Inspection & Final Inspection
Module 11

Control of Nonconforming of Items / Products
Module 12

Calibration of Monitoring & Measuring Equipment
Module 13

Project Quality Plan
Module 14

Preparation of Inspection Test Plans – ITPs
Module 15

Preparation of QC Procedures


MOU OF "CENTER OF EXCELLENCE"

New Batch Starts :- 5, 9 15, 22 Day of Every Month

BHADANI’S Quantity Surveying in Estimation Civil - Construction
Level 1 - Duration :- 45 Days

  1. Understanding the Role of BHADANI'S Quantity Surveying in the Construction Industry

  2. Checklist of All Kinds of Civil Works at Site.

  3. Construction Methodologies of Civil Works and How it works in Construction Industry
  4. Construction Activities Identification Analysis and Report Generation
  5. Making Project Chartered and Feasible Reports
  6. Project Risk Analysis and Action Reports
  7. Understanding and Reading the Structural and Architectural Drawings
  8. Quantity Take off From the Drawings Like PCC , RCC , Reinforcement , Shuttering Etc.
  9. Quantity Take off From the Architectural Drawings (Like Brickwork, Plaster Painting Putty Work Etc.)
  10. Faster Take off Methodologies from Drawings of Civil
  11. Analysis of All Kinds of Civil Drawings with Proper Presentation in Excel Formats
  12. Management Information System (MIS) Generation and Preparation in Proper Formats as per IS Standards
  13. Estimation of All Kinds of Civil Works 
  14. Estimation Technique  During Design Phase 
  15. Estimation Technique During Pre-Construction Phase
  16. Estimation Technique During Post-Construction Phase
  17. Calculator Making of Concrete Steel, Brickwork, Plaster Painting Etc.
  18. Pre-Engineered Building (PEB) Estimation 
  19. Costing Techniques of All Kinds of Civil Works (Concrete , Brikcwork, Earthwork, Finishing Work, Wood Work, Steel Work, Demolishing Works Etc.)
  20. Costing Techniques- Risk Based Costing
  21. Costing Techniques - Parametric Costing
  22. Costing Techniques - Machinery Transport Management and Costing
  23. Costing Techniques - Scope Estimation and Cost Analysis
  24. S-Curve Reporting 
  25. Labour Deployment Planning As per Budget 
  26. Labour Economics and Productivity Analysis
  27. Labour Output Analysis as per IS Code, Schedule of Rates and As per BHADANI'S New Technique
  28. Economic Order Quantity (EOQ) and Management
  29. Machinery Output Analysis as per Market Standards
  30. Profit and Loss Analysis in Labour and Machinery Deployed at Construction Site
  31. Daily Work Report (DWR) Preparation as per Quantity Surveyor Standards
  32. Bar Bending Schedule (BBS) of All RCC Structures Like Footing Beams Slabs, Columns , Raft , Footing, Staircase Etc.
  33. ​Bill of Quantity (BOQ) Take off (Material and Preparation)
  34. Rate Analysis of All Kinds of Civil Works
  35. Material Reconciliation Techniques from Contractor and Client's Side
  36. Material Procurement Strategies as per the techniques used in Quantity Surveying
  37. FREE  LANCE Quantity Surveying with Hands on Practice

CPWD TRAINING INSTITUTE GHAZIABAD

bhadanis educational consultancy in jamshedpur bishtupur Jharkhand Delhi Pune Bangalore

BHADANI’S  quantity surveying in tendering & construction contract management

( national and international contracting and competitive bidding)
Level 3 & 4:-
​​​ Duration :- 30 Days

  1. Tendering Documents Preparation

  2. Tendering Documents Submission Guidelines

  3. Tender Review Reports Generation (T.R.R) for the Contractors as well as Consultants
  4. Technical Bidding As per Government Laws and as per BHADANI'S Technique
  5. Financial Bidding As per Government Laws and as per BHADANI'S Technique
  6. ​Statutory Documents Preparation Techniques for the Tender 
  7. Purchasing and Negotiation Techniques used by Clients and as well as Contractor's Side
  8. Pre-Bid Meeting Strategy Building and Coordination with Client 
  9. Finding Deviations and Clarify with the Client
  10. Tender Hunting 
  11. Reverse Auctioning Strategy Building and Pressurizing client for the tender
  12. Pooling Technique to use effectively for the Tender to get Maximize Benefits
  13. Evaluation Strategy - Bidding Strategy - Relationship Building 
  14. Indemnify the Tender with the Use of Effective Monitoring of the Tender
  15. Entering Into Contracts - Strategy Building Approach - Scientific Approach
  16. Construction Contracts Documents Formulation and Preparation
  17. Procedures in Contract Management - Pre - Construction and Post Construction Phase
  18. Clearing , Forwarding and Transport 
  19. Transport Management
  20. Interpretation of Contracts and Contract Terms
  21. Cost Overrun and Time Overrun - Strategy Building Approach
  22. Indian Laws for Construction Contract Management
  23. FIDIC International Laws (EPC Turnkey Projects)
  24. Work Order Preparation ( Like Alstom Siemens Etc.)
  25. Live Project Training for Procurement and Negotiation Techniques